ZX-Tower™
$2,732.40
The ZX-Tower™ (ZX-T) wipe-only solution provides secure wiping of hard disk drives and USB enclosures. This reliable solution allows organizations to easily comply with NIST 800-88 guidelines for media sanitization.
The ZX-Tower™ wipe solution provides secure wiping of hard disk drives and USB enclosures. This reliable solution allows organizations to easily comply with NIST 800-88 Guidelines for media sanitization.
- Wipe up to 8 target hard drives and 4 USB 3.0 enclosures simultaneously
- Extremely fast hard drive wiping at 24GB/min
- Wipe drives conforming to NIST 800-88 Guidelines for Media Sanitation & DoD 5220.22-M Specifications
- Built-in support for 3.5″ SAS/SATA
- Support for 2.5″ SAS/SATA available with optional cartridge adapters
- IDE, ZIF, mSATA, microSATA, eSATA, flash media, M.2 NVMe and M.2 SATA support available with optional adapters
- Two Gigabit Ethernet port provide network connectivity to operate the ZX-T remotely
The ZX-T provides IT professionals in corporate and manufacturing environments the ability to quickly and confidently erase hard drive data, ensuring that drives are properly sanitized prior to re-purposing or disposal.
| Weight | 30 lbs |
|---|---|
| Dimensions | 24 × 12 × 24 in |
Features
High speed wiping
The ZX-T will sanitize hard drives at speeds exceeding 24GB/min
Multi-target Wiping
8 3.5″ SAS/SATA bays, 4 USB 3.0 ports
DoD Wipe
Supports 7 pass DoD specification 5220-22M wipe
Secure Erase
Supports a single pass Secure Erase
Custom Pass Wipe
Set a custom number of wipe passes. Gutmann 35 pass wipe can be accomplished using the Task Macro feature
Partial & Full Verify for Wipe Patterns
Satisfy NIST 800-88 Guidelines for Media Sanitation by selecting a partial or full verify for a Custom of DoD wipe
Built-in support SAS/SATA hard drives
Drive bays support 3.5″ SAS/SATA hard drives. Support for 2.5″ SATA and 2.5″ SAS drives is available with an optional slide-in cartridge adapter and the corresponding drive adapter. For information on which adapters suit your needs refer to our ZX-T adapter guide.
IDE, 1.8″ IDE ZIF drives
Support is available using optional adapters
M.2 PCIe (SATA & AHCI types), eSATA, mSATA, microSATA, Flash Media
Support is available using optional adapters
Wipe USB Enclosures and Thumb Drives
4 USB 3.0 ports are available
Network Support
Connect ZX-T to a network. Two Gigabit Ethernet ports are available
Cable-free, Slide-In Bays
Provides fast, worry-free, insertion/removal of drives
Multi-Session Capability
Allows user to perform multiple tasks – up to 5 tasks can be run concurrently
Icon-Based User Interface
Simple to use, easy to navigate through menus
Remote Operation
Connect ZX-T to a network and control all operations from a remote computer using a web browser. Remotely operate multiple ZX-T units that are connected to the same network
Color Touch Screen
A vibrant, responsive 5″ display makes it easy to navigate through menus
Advanced Administrative Functions
Allows administrators to manage network settings, create user profiles, save configurations
Audit Trail/Log Report
Provides detailed information of each operation. Can be exported to HTML, XML or PDF format
Task Macro
Allows users to set specific tasks to be performed sequentially. Automates your processes to optimize and streamline operations
HDMI Port
Allows you to connect to a projector or monitor
USB 2.0 Ports
Three USB 2.0 device ports are available for mouse, keyboard or printer
Power-Protected Bays
If a defective hard drive causes a power failure, only the bay in which the drive is inserted will shut down. The remaining bays will continue to operate.
HPA/DCO
Wipe HPA/DCO areas of the drive
One-year Standard Warranty
The system comes complete with a one year parts and labor warranty. Both an optional 1 year extended warranty (total of 2 years) and a 2 year extended warranty (total of 3 years) are available
Specs
Power Requirements:
100V-240V, 8A-4A, 50-60Hz
Operating Temperature:
32-104F (0 to +40C)
Storage Temperature
-4 to 176F (-20 to +80C)
Relative Humidity:
Operating: 85% RH, non condensing. Storage: 95% RH, non-condensing
Net Weight:
22 lbs (10 kg)
Dimensions:
17″ H X 17″ D X 7.5″ W (43.2cm X 43.2cm X 19.1cm)
Agency Approvals:
FCC Part 15 Class A, CE, RoHS Compliant
Accessories
M.2 NVMe PCIe SSD to USB Adapter
M.2 NVMe PCIe SSD to USB adapter to clone M.2 NVMe type drives.
USB Flash Card Reader
Used for cloning various flash media, including compact flash, SD cards.
2.5″ to 3.5″ SATA Drive Cartridge Adapter
Supports 2.5″ SATA drives up to 9mm in height.
2.5″ SAS Cartridge Adapter
Supports SAS/SATA drives including drives greater than 9mm. 2.5″ SAS cartridge adapter required when using the following optional adapters:
mSATA to SATA Adapter
M.2 SATA Adapter
microSATA Adapter
ZIF 1.8 Pack (includes 1.8″ IDE and 1.8″ ZIF)
mSATA to SATA Adapter
M.2 SATA Adapter
microSATA Adapter
ZIF 1.8 Pack (includes 1.8″ IDE and 1.8″ ZIF)
ZX-T SATA/SAS Extension Adapter
Tower bay insert with extended cable. ZX-T SATA/SAS Extension Adapter required when using the following optional adapters:
2.5″/3.5″ IDE
eSATA
2.5″/3.5″ IDE
eSATA
mSATA to SATA Cable
mSATA to SATA adapter to clone mSATA type drives.
M.2 SATA Adapter
M.2 SATA to SATA adapter.
microSATA to SATA Adapter
microSATA to SATA adapter to clone microSATA drives.
1.8″ ZIF to IDE and 1.8″ IDE to SATA Adapter
1.8″ ZIF to IDE and 1.8″ IDE to SATA adapter pack to clone 1.8″ IDE/PATA drives.
2.5″/3.5″ IDE to SATA Adapter
2.5/3.5″ IDE to SATA adapter to clone 2.5″ or 3.5″ IDE/PATA drives.
eSATA Cable
Cable for eSATA hard drives to clone eSATA drives.
