Hard Drive DuplicationSupports standard-height 3.5″ SAS and 3.5″/2.5″ SATA hard drives,USB enclosures and thumb drives. Optional support available for 2.5″ SAS,1.8/2.5/3.5″ IDE and IDE ZIF drives, eSATA, microSATA, mSATA and flash media. Optional support available for non-standard (over 9mm) height drives. For information on which adapter fits your specific needs refer to our ZClone adapter guide.
Multi-target Cloning8 dedicated 3.5″ SAS/SATA bays, two 3.5″ SATA-only bays, six dedicated USB 2.0 ports and one internal image storage drive.
Volume cloningSupports cloning to a maximum of 10 SATA targets or 8 SAS targets when cloning from a ZClone-created image stored on the internal drive or on a shared network location. Clone from a master/source drive to a maximum of 9 SATA targets (SATA source to SATA targets), 8 SAS drives (SATA source to SAS targets), 7 SAS drives (SAS source to SAS targets) or 6 USB target drives. Supports a maximum of 8 IDE/PATA targets using optional adapters
Data Transfer RateThe ZClone duplicates hard drives at speeds up to 15GB/min*
Cable-free, slide bays provides fast, worry-free insertion/removal of drives. Features a duty-cycle of 50,000 insertions.
Multiple master/source and target drives Users can assign any bay as a master/source or target drive
Network sharingAllows network access (upload/download) to drive images and log files
Clone from an image or a master/source hard driveSupports cloning from a ZClone-created image stored on ZClone’s internal storage drive, from a ZClone-created image stored on a shared network drive location, or clone from a master/source hard drive
Multi-session capabilityAllows users to perform multiple tasks including cloning wiping or hashing concurrently
Clone USB enclosures and thumb drives 6 USB 2.0 ports are accessible from the front panel. Optional factory-installed hardware support for USB 3.0 will be available in a future release
Large capacity drives ZClone provides support for today’s large capacity drives (>2TB)
Write-Protected SourceZClone drive bays or USB ports that are designated as a source/master by the user are automatically write-blocked to prevent any alteration to sensitive data on the source drive
Wipe featureZClone provides a comprehensive wipe mode. DoD wipe, Secure Erase and custom pass settings
*Speed based on 1 to 1 mirror cloning using solid state drives. Speeds will vary depending on type of drives and number of targets