The Zclone has been discontinued. Go to Logicube hard drive duplication to see the latest products.
The latest software version for your Logicube product is listed below. We provide frequent software updates to add features and improve performance. ZClone software can be updated directly from ZClone via an internet connection or via a USB drive. Please refer to the ZClone users manual, the readme.txt on this page or contact Logicube support for instructions.
|2014-03-19||1.06-RC11||ZClone Software||ZClone software version 1.06-RC11.zip||9010 KB|
|2014-03-19||1.06-RC11||ZClone Software readme||ZClone software v1.0-06-RC11 readme.txt||7kb|
If you need assistance in updating the software on your Logicube product please contact our technical support department at email@example.com or 818-700-8488.
The latest product documentation for your Logicube product is listed below. This includes product manuals, technical or application notes and other documentation to assist you while using your device. Click on any title to download the document as a PDF. If you need assistance in downloading or any questions regarding these documents please contact our technical support department at firstname.lastname@example.org or 818-700-8488.
- ZClone Users Manual
- ZClone Adapter Guide
- ZClone CLI Application Note
- Windows 7 & 8 & 10 Cloning Guidelines
What is the duty cycle of the ZClone drive bays?
The ZClone drive bays are rated for 50,000 insertions
How many concurrent tasks can the ZClone run?
ZClone can run up to 5 concurrent tasks.
Do target drives have to be formatted and partitioned prior to cloning?
No. target drives do not need to be formatted, partitioned or otherwise modified prior to cloning. The Logicube ZClone disregards everything on the target drive, reformatting and partitioning it during cloning
Will Clever Clone work with Linux partitions?
yes. ZClone’s Clever Clone will work with Linux partitions.
Will Clever Clone work with Hierarchical File System (HFS)?
No, for hierarchical File Systems, Mirror mode must be used.
Can you connect multiple ZClone units with just one master drive?
The ZClone cannot be “daisy-chained” with other ZClone units. However, you can create an image to a network location (repository location on a network)and use multiple ZClones, all connected to the same network and access the image on the network location at the same time. Cloning speeds will depend on the network speeds and network traffic.