The OmniSAS has been discontinued. Go to Logicube hard drive duplication to see the latest products.
The latest software version for your Logicube product is listed below. Click on the file to start the download. If you need assistance in updating the software on your Logicube product please contact our technical support department at firstname.lastname@example.org or 818-700-8488.
- OmniSAS Software Ver 4.08
- OmniSAS Software Ver. 5.01 For units shipped after 5/31/13 ( S/N 60283 and higher)
The latest product documentation for your Logicube product is listed below. This includes product manuals, technical or application notes and other documentation to assist you while using your device. Click on any title to download the document as a PDF. If you need assistance in downloading or any questions regarding these documents please contact our technical support department at email@example.com or 818-700-8488.Return to top
Are Logicube duplicators compatible with Windows 7 operating system?
The Echo Plus, Sonix, SuperSonix, OmniClone Xi and OmniSAS products are compatible with Windows 7 operating system. Special instructions must be followed to clone Windows 7 drives using CleverCopy mode if the destination drive is larger than the source drive or if the source drives contains a “recovery” partion and Selective Partitions software is required. Please note that at this time, MasterManager is not compatible with Windows 7, compatibility will be provided in a future software update. Please see information in the Windows 7 Cloning Guide or the specific Logicube duplicator’s users guide or contact our Technical Support department for assistance.
What is DDF?
DDF stands for the Common RAID Disk Data Format, a standard set by SNIA
What is SNIA?
SNIA stands for the Storage Networking Industry Association
Can the LogicubeOmniSAS clone disk drives from a RAID array?
Yes. OmniSAS software version 4.08 has improved compatibility for cloning disk drives from a RAID array. This applies to RAID disk drives from RAID arrays that use a RAID controller compliant with the SNIA (Storage Networking Industry Association), DDF (Common RAID Disk Data Format).
What type of RAID arrays can be cloned using the LogicubeOmniSAS?
All types of RAID arrays can be cloned by the OmniSAS. For step-by-step instructions and for more information on cloning disk drives from a RAID array, see the RAID Cloning Guidelines section of the latest version OmniSASUsers Manual (v1.2 or later)