| OmniClone IDE Laptop Adapters |
 |
|
|
|
 |
|
F-ADP-1.8 |
|
1.8" IDE Drive Adapter for Toshiba hard drives. |
$119.00 |
|
|
|
|
|
|
F-ADP-COMP-FL |
|
Compact Flash adapter; to be used for bare flash media and microdrives. User may connect Logicube IDE cable to CF adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators |
$119.00 |
|
|
|
|
|
|
F-ADP-DOM |
|
2.5 inch Adapter (Disk Module). 40 to 44 pin adapter to be used for bare drive IDE connections. Users may connect standard IDE cables to 1.8” adapter for flow through during the cloning process. Adapter comes with its own power lead which fits into any of the Logicube Duplicators. |
$49.99 |
|
|
|
|
|
|
F-ADP-IDE |
|
IDE/PATA Cloning Adapter for use with OmniSAS five-target HDD duplicator and the OmniSCSI 4. Allows use of IDE drives in master or target position (OmniSAS) and master position only on OmniSCSI 4. |
$250.00 |
|
|
|
|
|
|
F-ADP-STND |
|
2.5" laptop adapter to be used for bare laptop drive IDE connections. User may connect standard IDE cable to 2.5" adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators. (Quantity 1) |
$47.95 |
|
|
|
|
|
|
F-ADP-STND-3A |
|
2.5" laptop adapter. 40 to 44 pin adapter to be used for bare laptop drive IDE connections. User may connect standard IDE cable to 2.5" adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators. (Quantity 3) |
$129.45 |
|
|
|
|
|
|
F-ADP-STND-6A |
|
2.5" laptop adapter. 40 to 44 pin adapter to be used for bare laptop drive IDE connections. User may connect standard IDE cable to 2.5" adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators. (Quantity 6) |
$249.95 |
|
|
|
|
|
|
F-ADP-ZIF |
|
1.8" ZIF (Zero Insertion Force) Drive Adapter for Hitachi and Toshiba hard drives. 40 pin adapter to be used for bare drive IDE connections. Includes two cables (thick and thin). |
$149.95 |
|
|
|
| OmniClone SCSI Adapters |
|
|
|
|
|
|
F-ADP-SCSI |
|
The SCSI Adapter allows you to capture from a SCSI source drive to either a SATA or IDE destination drive when used with the Forensic Dossier or Forensic Quest-2. |
Call |
|
|
|
|
|
|
F-ADP-SCSI-50 |
|
SCSI 50 to 68 pin adapter. OmniSCSI unit comes with standard 68 pin configuration. |
$75.00 |
|
|
|
|
|
|
F-ADP-SCSI-80 |
|
SCSI 80 to 68 pin adapter. OmniSCSI unit comes with standard 68 pin configuration. |
$75.00 |
|
|
|
| OmniClone IDE Cables |
|
|
|
|
|
|
F-CABLE-30A |
|
30" extended IDE and power cable set. Extended reach may be necessary for situations when user removes the cover of the pc and does not want to physically remove the hard drive from the system. Cable to be purchased for any NON UDMA model cloner. |
$39.95 |
|
|
|
|
|
|
F-CABLE-5 |
|
OmniClone 5" IDE and power cables (1 set). 5" IDE and power cable set. Replacement cable set for NON UDMA model cloners. |
$14.99 |
|
|
|
|
|
|
F-CABLE-9 |
|
OmniClone™ 9" IDE and power cables (1 set). 9" IDE and power cable set. Replacement cable set for NON UDMA model cloners. |
$14.99 |
|
|
|
|
|
|
F-CABLE-ESATA |
|
Cable for eSATA drives. Compatible for use with EchoPlus, Sonix, SuperSonix, OmniClone 2Xi, 5Xi, 10XI, OmniSAS, Quest, Talon, Dossier |
$25.00 |
|
|
|
|
|
|
F-CABLE-MCRSATA |
|
Cable for microSATA hard drives for use with Sonix, SuperSonix, Quest, EchoPlus, Dossier, Talon |
$199.00 |
|
|
|
|
|
|
F-CABLE-RP10 |
|
OmniClone™ 10 IDE and power cables (12 x5" sets). 5" IDE and power cable set. Set of (12). Replacement cable set for NON UDMA model cloners. |
$139.99 |
|
|
|
|
|
|
F-CABLE-RP15 |
|
OmniClone™ 15 IDE and power cables (18x5" sets). 5" IDE and power cable set. Set of (18). Replacement cable set for NON UDMA model cloners. |
$199.99 |
|
|
|
|
|
|
F-CABLE-RP2 |
|
OmniClone™ 2 IDE and power cables (3 x5" sets). 5" IDE and power cable set. Set of (3). Replacement cable set for NON UDMA model cloners. |
$37.99 |
|
|
|
|
|
|
F-CABLE-RP5 |
|
OmniClone™ 5 IDE and power cables (6 x5" sets). 5" IDE and power cable set. Set of (6). Replacement cable set for NON UDMA model cloners. |
$69.99 |
|
|
|
|
|
|
F-CABLE-SAS5 |
|
Set of six replacement 5" SAS/SATA cables for OmniSAS HDD duplicator |
$100.00 |
|
|
|
|
|
|
F-CABLE-SATA |
|
Serial ATA Cable (Internal and External Cables) for the Sonix and Talon units. |
$49.95 |
|
|
|
|
|
|
F-CABLE-SATA18 |
|
18" Extended length Serial ATA Cable set for the Sonix, Talon, Echo Plus and Quest |
$49.95 |
|
|
|
|
|
|
F-CABLE-SATAEP |
|
Serial ATA cables ( 2 external 9" cables) for Echo Plus |
$49.95 |
|
|
|
|
|
|
F-CABLE-SATAXI |
|
XI SATA Cable Replacements (Set of 3). These SATA cables are for the OmniClone Xi series (2, 5, & 10). |
$59.95 |
|
|
|
|
|
|
F-CABLE-SOL |
|
OmniClone™ Solitaire IDE and power cables (1 set) 5 x 9" IDE and power cable set. Replacement cable set for NON UDMA model Solitaire cloner. |
$29.99 |
|
|
|
|
|
|
F-CABLE-SOLU2 |
|
Internal/External IDE replacement cables for Dossier |
$59.99 |
|
|
|
|
|
|
F-CBL-MCRSTAXI |
|
Cable for microSATA hard drives compatible with OmniClone 2Xi, 5Xi, 10Xi and OmniSAS. |
$199.00 |
|
|
|
| OmniClone UDMA IDE Cables |
|
|
|
|
|
|
F-CABLE-RP2U |
|
OmniClone™ 2 UDMA IDE and power cables (3 x 5" sets). 5" IDE and power cable set. Set of (3). Replacement cable set for UDMA model cloners. |
$47.99 |
|
|
|
|
|
|
F-CABLE-RP5U |
|
OmniClone™ 5 UDMA IDE and power cables (6 x 5" sets). 5" IDE and power cable set. Set of (6). Replacement cable set for UDMA model cloners. |
$95.99 |
|
|
|
|
|
|
F-CABLE-RP10U |
|
OmniClone™ 10 UDMA IDE and power cables (12 x 5" sets). 5" IDE and power cable set. Set of (12). Replacement cable set for UDMA model cloners. |
$179.99 |
|
|
|
|
|
|
F-CABLE-RP15U |
|
OmniClone™ 15 UDMA IDE and power cables (18 x 5" sets). 5" IDE and power cable set. Set of (18). Replacement cable set for UDMA model cloners. |
$239.99 |
|
|
|
|
|
|
F-CABLE-SOLU |
|
OmniClone™ UDMA IDE and power cables (1 set) (5"/9"). Replacement cable set for UDMA model Solitaire Turbo/Sonix cloner. |
$29.99 |
|
|
|
|
|
|
F-CABLE-5U |
|
OmniClone™ 5" UDMA IDE and power cables (1 set). 5" UDMA IDE and power cable set. Replacement cable set fo UDMA model cloners. |
$19.99 |
|
|
|
|
|
|
F-CABLE-9U |
|
OmniClone™ 9" UDMA IDE and power cables (1 set). 9" IDE and power cable set. Replacement cable set for UDMA model cloners. |
$19.99 |
|
|
|
|
|
|
F-CABLE-30U |
|
18" Extended OnmiClone UDMA IDE and power cables (1 set). 18" extended IDE and power cable set. Extended reach may be necessary for situations when user removes the cover of the pc and does not want to physically remove the hard drive from the system. Cables to be purchased for any UDMA model cloner. |
$39.95 |
|
|
|
|
|
|
F-CABLE-XI |
|
5" UDMA IDE and power cable set for the OmniClone XI series 2, 5, & 10.
Replacement set of UDMA model cloners. |
$19.99 |
|
|
|
|
|
|
F-CABLE-2XI |
|
Set of 3 x 5" UDMA IDE and power cables for the OmniClone 2XI. Replacement set of UDMA model cloners. |
$47.99 |
|
|
|
|
|
|
F-CABLE-5XI |
|
Set of 6 x 5" UDMA IDE and power cables for OC5XI. Replacement set of UDMA model cloners. |
$95.99 |
|
|
|
|
|
|
F-CABLE-10XI |
|
Set of 11 x 5" UDMA IDE and power cables for OC10XI
|
$179.99 |
|
|
|
| OmniClone SCSI Cables |
|
|
|
|
|
|
F-CABLE-SCSI |
|
OmniClone™ SCSI and power cables (1 set). 5" SCSI and power cable set. Replacement cable set for OmniSCSI 2 or 4 target cloner. |
$29.99 |
|
|
|
|
|
|
F-CABLE-SCSI2 |
|
OmniClone™ SCSI and power cables (3 sets). 5" SCSI and power cable set. Set of (3). Replacement cable set for OmniSCSI 2 or 4 target cloner. |
$47.99 |
|
|
|
|
|
|
F-CABLE-SCSI4 |
|
OmniClone™ SCSI and power cables (5 sets). 5" SCSI and power cable set. (Set of 5) Replacement cable set for OmniSCSI 2 or 4 target cloner. |
$75.99 |
|
|
|
